LEAD TIMES

ModernConscience_GreyBackground.jpg About Us  /  Store Home  /  Restoration Services  
Blog  /  Sold  /  Contact  


SHOP>   FURNISHINGS+OBJECTS    PARTS+SPARES    RESTORATION SUPPLIES  

Shopping Cart

PARTS+SPARES / Eames Barstool Dowel Chair



Our most important ambition continues to be providing you with the very best in design, quality, and service.

Our parts are either OEM (original equipment manufacturer) or made in our own state-of-the-art workshops in the United States from the highest quality materials available.

We know that perfection matters to you. We spend time on all of the details to make sure that the parts you're purchasing for your restorations match the originals just as they should. We take no shortcuts; only the most accurate restoration with the most accurate parts can enhance the value of your chair. Modern Conscience has the largest and most accurate selection of repair parts for Eames and mid-century chairs.
>> To learn more click here.


EamesBarstoolChair_Parts_List

LineLightGrey.jpg
Eames Fiberglass Cleaning Sponge -Pack of Two Sponges
HardwareEamesFiberglassCleaningSponge.jpg

Eames Fiberglass Cleaning Sponges. These sponges make cleaning fiberglass easy. They are pre-impregnated with a gentle cleaning solution and have a strong cleaning power, with a gentle sponge texture to prevent damage to the gel coat. Using them is as simple as wetting the sponge with water and cleaning up your seat. Once you've tried them you'll never use anything else. They work best on fiberglass which requires medium to heavy cleaning; fiberglass with severe damage to the gel coat will require restoration as opposed to cleaning. The sponges also work well on other plastic and resin furniture and components.

$10.00
Qty    View Cart
LineLightGrey.jpg
Modern Conscience Fiberglass Gel Coat Restoration Kit (Solvent / Oil Base)
HardwareFiberglassGelCoatKit.jpg

Modern Conscience Fiberglass Gel Coat Restoration Kits. These handy little kits contain everything you'll need to restore the gel coat on your rough or dried out fiberglass shells. The kits contain a 1/2 pint of either oil and solvent based solution or waxed base solution. We use both methods for such restoration in-house. These are both industry standards for gel coat restoration. An oil and solvent based solution will require fewer coats to quickly achieve a medium gloss. While a wax based solution gives the restorer more freedom to build a finish ranging from matte to gloss over more time with several coats.

Instructions, wet sandpaper, an abrasive pad, and lint-free cloths are also included. Each kit includes enough product to handle an average restoration for a set of four sideshells, or two armshells. If a more aggressive restoration is required plan for the kit to handle about two sideshells or one armshell.

Please note that oil and solvent based gel coat restoration products will tend to cause a slight yellow tinge to lighter colors of fiberglass like Parchment and Greige. For lighter colors we recommend our wax-based gel coat restoration kit.

Modern Conscience Fiberglass Gel Coat Restoration Kit (Solvent / Oil Base)

$39.00
This item is available to ship by Ground shipping only to the United
States, excluding Alaska, Hawaii, and California. Shipping outside of the
United States is not available.

Qty    View Cart


Modern Conscience Fiberglass Gel Coat Restoration Kit (Wax-Based)
HardwareFiberglassWaxGelCoatKit.jpg Modern Conscience Fiberglass Gel Coat Restoration Kit (Wax-Based)
$39.00
This item is available to ship by Ground shipping only to the United
States, excluding Alaska and Hawaii. Shipping outside of the United
States is not available.

Qty    View Cart

LineLightGrey.jpg
Modern Conscience All-Purpose Restoration and Maintenance Kit (Wax-Based)
HardwarePasteWaxFinishKit.jpg Modern Conscience All-Purpose Restoration Kit. This fantastic kit includes everything you'll need to condition fiberglass, wood, leather, metal, and plastic. This is the same paste wax we use in-house and it's an essential in the restorer's tool kit.

This paste wax is a versatile finish. It provides a rich, satiny luster. The restorer has a great deal of control over the finished product with sheen ranging from a hand buffed matte, all the way to a mechanically polished gloss. Use paste wax to create your own signature finish.

This kit is also a must for routine cleaning and conditioning. Use it to keep your priceless collection in gorgeous condition.

A half pint of our paste wax, instructions, wet sandpaper, dry sandpaper, an abrasive pad, steel wool and lint-free cloths are included. Each kit includes enough product to handle several pieces of furniture, such as a set of eight dining chairs, a dining table, and a credenza.

$49.00
This item is available to ship by Ground shipping only to the United
States, excluding Alaska and Hawaii. Shipping outside of the United
States is not available.

Qty    View Cart

LineLightGrey.jpg
Replacement Eames Fiberglass Shockmounts (Coarse Thread, Zinc Screws) - One Shockmount, One Screw, and One Washer

Eames Shock Mounts, Shockmounts. These are custom made shockmounts for vintage Charles and Ray Eames for Herman Miller fiberglass shells. These shockmounts are available in all of the original styles which include coarse thread and fine thread screw types. Typically seats made in the 1960's and newer will require coarse thread, and those older than this will require fine thread. You can easily use one of your original screws to determine thread type. Count the threads in a 1/2" length; there will be 10 threads for coarse thread and 14 threads for fine thread.

These shockmounts are made from proprietary thermoplastic elastomer, an aerospace grade rubber. They are manufactured in our workshop in high-heat conditions under tight controls. They are rigorously tested for performance and compatibility with adhesives. We recommend Modern Conscience adhesives and professional installation for successful repairs. They are new, screws are included. Modern Conscience rubber parts are made in the US from the highest quality US made rubber and components available. To learn more click here.

HardwareCoarseShockmounts-.jpg

Replacement Eames Fiberglass Shockmounts (Coarse Thread, Zinc Screws) - One Shockmount, One Screw, and One Washer

$18.00
Qty    View Cart

Replacement Eames Fiberglass Shockmounts (Coarse Thread, Black Screws) - One Shockmount, One Screw, and One Washer
HardwareCoarseShockmountsBlack.jpg Replacement Eames Fiberglass Shockmounts (Coarse Thread, Black Screws) - One Shockmount, One Screw, and One Washer
$18.50
Qty    View Cart

Replacement Eames Fiberglass Shockmounts (Fine Thread, Zinc Screws) - One Shockmount, One Screw, and One Washer
HardwareFineShockmounts-.jpg Replacement Eames Fiberglass Shockmounts (Fine Thread, Zinc Screws) - One Shockmount, One Screw, and One Washer
$18.00
Qty    View Cart

Replacement Eames Fiberglass Shockmounts (Fine Thread, Black Screws) - One Shockmount, One Screw, and One Washer
HardwareFineShockmountsBlack.jpg Replacement Eames Fiberglass Shockmounts (Fine Thread, Black Screws) - One Shockmount, One Screw, and One Washer
$18.50
Qty    View Cart
LineLightGrey.jpg
Modern Conscience Fiberglass Shockmount Adhesive
HardwareFiberglassShockmountAdhesive.jpg

Modern Conscience Fiberglass Shockmount Adhesive has been specifically tested to perform best in the application of a Modern Conscience shockmount to a fiberglass seat. This product is used for the installation of rubber shockmounts on fiberglass seats. It is rubber toughened, black, and reaches full cure strength in about 48 hours.

Modern Conscience Fiberglass Shockmount Adhesive is specifically recommended in conjunction with Modern Conscience shockmounts, as it has been tested specifically for this purpose. Modern Conscience Adhesive Activator is also recommended to make the process go quickly and smoothly. One bottle will provide enough adhesive to replace 8-12 shockmounts.

$17.00
Qty    View Cart
LineLightGrey.jpg
Modern Conscience Adhesive Activator
HardwareAdhesiveActivator.jpg

Modern Conscience Adhesive Activator can be used with both the Fiberglass and Wood Shockmount Adhesives. This product is used to accelerate Modern Conscience Adhesive. It makes the process of shockmount repair go smoothly and quickly by eliminating the need for clamping or taping and holds the shockmount in an exact position during the 48 hour cure time of the adhesive. One bottle of activator will take care of 16-20 shockmounts depending on how many drips are used.

$8.00
Qty    View Cart
LineLightGrey.jpg
Modern Conscience Shockmount Adhesive Remover
HardwareShockmountAdhesiveRemover.jpg

Modern Conscience Adhesive Remover will dissolve cured Modern Conscience Adhesive within a few minutes. It can be used to correct repair mistakes as well as to separate fingers that have gotten stuck together with Modern Conscience Adhesive.

$9.00
Qty    View Cart
LineLightGrey.jpg
Replacement Eames Fiberglass Screws (Coarse Thread) (Zinc) - Set of Four
Eames Screws. A set of four replacement coarse thread screws that will replace coarse thread screws for a number of seats including vintage and new Herman Miller seats. Typically seats made in the 1960's and newer will require coarse thread screws. You can easily use one of your original screws to determine thread type. Count the threads in a 1/2" length; there will be 10 threads for coarse thread and 14 threads for fine thread.

HardwareNewCoarseThread.jpg

Replacement Eames Fiberglass Screws (Coarse Thread, Zinc) - Set of Four

$7.00
Qty    View Cart

Replacement Eames Fiberglass Screws (Coarse Thread, Black) - Set of Four
HardwareNewCoarseThreadBlack.jpg

Replacement Eames Fiberglass Screws (Coarse Thread, Black) - Set of Four

$10.00
Qty    View Cart

Replacement Eames Fiberglass Screws (Coarse Thread, Locking) - Set of Four
HardwarePhilipsCoarseThreadLock.jpg

Replacement Eames Fiberglass Screws (Coarse Thread, Locking) - Set of Four

$12.00
Qty    View Cart
LineLightGrey.jpg
Replacement Eames Fiberglass Screws (Fine Thread) (Zinc) - Set of Four
Eames Screws. A set of four replacement fine thread screws that will replace fine thread screws for a number of seats including vintage Eames Herman Miller seats, and some vintage Eames Wire seats. Typically seats made earlier than the 1960's will require fine thread screws. You can easily use one of your original screws to determine thread type. Count the threads in a 1/2" length; there will be 10 threads for coarse thread and 14 threads for fine thread.

HardwareNewFineThread.jpg

Replacement Eames Fiberglass Screws (Fine Thread, Zinc) - Set of Four

$8.00
Qty    View Cart

Replacement Eames Fiberglass Screws (Fine Thread, Black) - Set of Four
HardwareNewFineThreadBlack.jpg

Replacement Eames Fiberglass Screws (Fine Thread, Black) - Set of Four

$11.00
Qty    View Cart
LineLightGrey.jpg
Vintage Eames Fiberglass Screws (Fine Thread) (Standard)- One Screw

Vintage Eames Fiberglass Shockmount Screws. Modern Conscience carries a full collection of vintage screws which are offered for the purpose of replacing a missing screw on a vintage seat which is otherwise 100% original. The screws are all vintage original, you will find that they are either coarse thread or fine thread, depending on the exact screw. You can easily check one of your original screws to determine thread type. Count the threads in a 1/2" length; there will be 10 threads for coarse thread and 14 threads for fine thread.

HardwareVintageFineThread.jpg

Vintage Eames Fiberglass Screws (Fine Thread, Standard) - One Screw

$6.50
Qty    View Cart

Vintage Eames Fiberglass Screw (Fine Thread, Locking) - One Screw
HardwarePhilipsFineThreadLock.jpg

Vintage Eames Fiberglass Screw (Fine Thread, Locking) - One Screw

$6.50
Qty    View Cart
LineLightGrey.jpg
Vintage Eames Fiberglass Screws (Coarse Thread) (Flat Short Flange) - One Screw

Vintage Eames Fiberglass Shockmount Screws. Modern Conscience carries a full collection of vintage screws which are offered for the purpose of replacing a missing screw on a vintage seat which is otherwise 100% original. The screws are all vintage original, you will find that they are either coarse thread or fine thread, depending on the exact screw. You can easily check one of your original screws to determine thread type. Count the threads in a 1/2" length; there will be 10 threads for coarse thread and 14 threads for fine thread.

HardwareFlatShortFlangeCoarse.jpg

Vintage Eames Fiberglass Screw (Coarse Thread, Flat Short Flange) - One Screw

$6.50
Qty    View Cart

Vintage Eames Fiberglass Screw (Coarse Thread, Curved Short Flange) - One Screw
HardwareCurvedShortFlangeCoarse.jpg

Vintage Eames Fiberglass Screw (Coarse Thread, Curved Short Flange) - One Screw

$6.50
Qty    View Cart

Vintage Eames Fiberglass Screw (Coarse Thread, Curved Long Flange) - One Screw
HardwareCurvedLongFlangeCoarse.jpg

Vintage Eames Fiberglass Screw (Coarse Thread, Curved Long Flange) - One Screw

$6.50
Qty    View Cart

Vintage Eames Fiberglass Screw (Coarse Thread, Hex Head, Locking) - One Screw
HardwareHexCoarseThreadLock.jpg

Vintage Eames Fiberglass Screw (Coarse Thread, Hex Head, Locking) - One Screw

$6.50
Qty    View Cart
LineLightGrey.jpg
Replacement Eames Dowel Leg Glides (Brown)- Set of Four
HardwareDowelGlideBrown.jpg Eames Dowel Leg Glides. A set of four new glides to replace glides on Eames dowel base legs. The glides are brown and are 5/8" (1.6cm) in diameter.
$10.00
Qty    View Cart
LineLightGrey.jpg
Replacement Eames Dowel Leg Glides (White)- Set of Four
HardwareDowelGlideWhite.jpg Eames Dowel Leg Glides. A set of four new glides to replace glides on Eames dowel base legs. The glides are white and are 5/8" (1.6cm) in diameter.
$10.00
Qty    View Cart
LineWide.jpg

Counter and Bar Stool Bases for Vintage Eames Fiberglass

EamesCounterstoolDowelBlackMaple_Thumbnail.jpg

Maple Bar or Counter Height Dowel Base

$325

Studio Made, USA
ModernConscience_Thumbnail.jpg
EamesBarstoolDowelBlackWalnut_Thumbnail.jpg

Walnut Bar or Counter Height Dowel Base

$325

Studio Made, USA
ModernConscience_Thumbnail.jpg



Click_below_for_answers..jpg
> Tell me more about the quality of your bases.
> What seasts do your bases fit?
> How do I know if my seats are wide or narrow mount?
> I have a narrow mount seat, which bases will it fit?
> I have a wide mount seat, which bases will it fit?
> Do the wide and narrow mount dowel bases look different from one another?
> What's the difference between Maple and Birch?
> Tell me more about wood finishes and stains.