Ward Bennett Glass Table Top Bumpers. This is a replacement set of four clear rubber bumpers for glass table tops. This bumper has a 3/8" diameter and a 1/8" foot, designed to fit in the small tubular opening at the top of some of the Ward Bennett table designs. Please contact us if you require a different style bumper for alternate Ward Bennett designs, we are able to accommodate nearly every request.

Ward Bennett Table Glide. This is a custom fabricated table glide designed to match Ward Bennett tables with tubular legs. This particular glide is machined and polished stainless steel. The glide diameter is 3/4" and is 1/4" high. Alternate dimensions are available; please contact us if you require an alternate version, we are able to accommodate nearly every request.

AVAILABILITY - this glide is made to order, please allow us approximately one week to machine your glide for you.

Luther Conover Shock Mounts, Shockmounts. These are new rubber shockmounts which have been cast with polyurethane to match the original shape and dimension and the original screw type. They are new, original style screws and washers are included. Modern Conscience rubber parts are made in the US from the highest quality US made rubber and components available. To learn more click here.

Replacement Luther Conover Style Shockmounts - One Mount

Modern Conscience Fiberglass Shockmount Adhesive has been specifically tested to perform best in the application of a Modern Conscience shockmount to a fiberglass seat. This product is used for the installation of rubber shockmounts on fiberglass seats. It is rubber toughened, black, and reaches full cure strength in about 48 hours.

Modern Conscience Fiberglass Shockmount Adhesive is specifically recommended in conjunction with Modern Conscience shockmounts, as it has been tested specifically for this purpose. Modern Conscience Adhesive Activator is also recommended to make the process go quickly and smoothly. One bottle will provide enough adhesive to replace 8-12 shockmounts.

Modern Conscience Adhesive Activator can be used with both the Fiberglass and Wood Shockmount Adhesives. This product is used to accelerate Modern Conscience Adhesive. It makes the process of shockmount repair go smoothly and quickly by eliminating the need for clamping or taping and holds the shockmount in an exact position during the 48 hour cure time of the adhesive. One bottle of activator will take care of 16-20 shockmounts depending on how many drips are used.

Modern Conscience Adhesive Remover will dissolve cured Modern Conscience Adhesive within a few minutes. It can be used to correct repair mistakes as well as to separate fingers that have gotten stuck together with Modern Conscience Adhesive.

Saarinen Executive Chair Glides. A set of four glides for Eero Saarinen for Knoll Executive side and arm chairs. These fit the seats with the metal bases. A perfect match.

Modern Conscience Wood Restoration Kits. These handy little kits contain everything you'll need to restore the wood finish on your classic pieces. These are the same products we use in-house. The kits contain a 1/2 pint of either raw tung oil, tung oil finish, or waxed base solution. We all three methods for such restoration in-house. These are all industry standards for wood finish conditioning and restoration. The tung oil finish will require fewer coats to quickly achieve a medium gloss. While a wax based solution gives the restorer more freedom to build a finish ranging from matte to gloss over more time with several coats. Raw tung oil requires the most patience with several days long dry time between coats and lots of buffing required.

Instructions, sandpaper, steel wool, and lint-free cloths are also included. Each kit includes enough product to handle an average restoration for four to six chairs. If a more aggressive restoration is required plan for the kit to handle about two chairs.

Modern Conscience Wood Restoration Kit (Tung Oil Finish)

Modern Conscience Fiberglass Gel Coat Restoration Kits. These handy little kits contain everything you'll need to restore the gel coat on your rough or dried out fiberglass shells. The kits contain a 1/2 pint of either oil and solvent based solution or waxed base solution. We use both methods for such restoration in-house. These are both industry standards for gel coat restoration. An oil and solvent based solution will require fewer coats to quickly achieve a medium gloss. While a wax based solution gives the restorer more freedom to build a finish ranging from matte to gloss over more time with several coats.

Instructions, wet sandpaper, an abrasive pad, and lint-free cloths are also included. Each kit includes enough product to handle an average restoration for a set of four sideshells, or two armshells. If a more aggressive restoration is required plan for the kit to handle about two sideshells or one armshell.

Please note that oil and solvent based gel coat restoration products will tend to cause a slight yellow tinge to lighter colors of fiberglass like Parchment and Greige. For lighter colors we recommend our wax-based gel coat restoration kit.

Modern Conscience Fiberglass Gel Coat Restoration Kit (Solvent / Oil Base)