Modern Conscience Adhesive Activator can be used with both the Fiberglass and Wood Shockmount Adhesives. This product is used to accelerate Modern Conscience Adhesive. It makes the process of shockmount repair go smoothly and quickly by eliminating the need for clamping or taping and holds the shockmount in an exact position during the 48 hour cure time of the adhesive. One bottle of activator will take care of 16-20 shockmounts depending on how many drips are used.

Modern Conscience Adhesive Remover will dissolve cured Modern Conscience Adhesive within a few minutes. It can be used to correct repair mistakes as well as to separate fingers that have gotten stuck together with Modern Conscience Adhesive.

These shockmounts are a new and improved proprietary thermoplastic elastomer. They are manufactured in our workshop in high-heat conditions under tight controls. They are rigorously tested for performance and compatibility with adhesives. We recommend Modern Conscience adhesives for successful repairs. They are new, screws are included.

Replacement Nelson Fiberglass Shockmounts (Zinc Screws) - Set of Four Mounts and Screws

Modern Conscience Fiberglass Shockmount Adhesive has been specifically tested to perform best in the application of a Modern Conscience shockmount to a fiberglass seat. This product is used for the installation of rubber shockmounts on fiberglass seats. It is rubber toughened, black, and reaches full cure strength in about 48 hours.

Modern Conscience Fiberglass Shockmount Adhesive is specifically recommended in conjunction with Modern Conscience shockmounts, as it has been tested specifically for this purpose. Modern Conscience Adhesive Activator is also recommended to make the process go quickly and smoothly. One bottle will provide enough adhesive to replace 8-12 shockmounts.

Replacement Nelson Swag Leg Chair Screws (Zinc) - Set of Four

Modern Conscience Fiberglass Gel Coat Restoration Kits. These handy little kits contain everything you'll need to restore the gel coat on your rough or dried out fiberglass shells. The kits contain a 1/2 pint of either oil and solvent based solution or waxed base solution. We use both methods for such restoration in-house. These are both industry standards for gel coat restoration. An oil and solvent based solution will require fewer coats to quickly achieve a medium gloss. While a wax based solution gives the restorer more freedom to build a finish ranging from matte to gloss over more time with several coats.

Instructions, wet sandpaper, an abrasive pad, and lint-free cloths are also included. Each kit includes enough product to handle an average restoration for a set of four sideshells, or two armshells. If a more aggressive restoration is required plan for the kit to handle about two sideshells or one armshell.

Please note that oil and solvent based gel coat restoration products will tend to cause a slight yellow tinge to lighter colors of fiberglass like Parchment and Greige. For lighter colors we recommend our wax-based gel coat restoration kit.

Modern Conscience Fiberglass Gel Coat Restoration Kit (Solvent / Oil Base)